Aqua Nova PU hose for CO2

Aqua Nova PU hose for CO₂

Made of transparent polyurethane the Aqua Nova PU hose is a robust and flexible component of any CO₂ installation.

It is characterised by high resistance to temperature, mechanical damage and deformation. The durable walls allow the hose to be bent freely without the risk of breaking, making it easy to adapt to your individual installation layout.

It is ideal for aquariums, but also for other systems, ensuring reliable and leak-proof connections for a long time.

Aqua Nova PU hose for CO₂ used to connect individual components of CO₂ installations, such as a diffuser, bubble counter or regulator. It enables a tight and secure connection of the entire CO₂ set, ensuring its proper operation.

Length: 1 m

Diameter: 4/6 mm

Working pressure: 10 Bar

Quantity sold: 1 metre of PU hose.
If you need a longer hose, add the appropriate quantity to your basket — e.g. 10 × 1 metre
The hose will be shipped in one continuous piece.
If you want it to be cut into several pieces (e.g. two or three), add the relevant information in the order comments.

Tip1:

To easily and effectively apply the PU hose onto individual components of the CO2 system (e.g. glass CO2 bubble counter), dip the end of the hose in hot water for a moment, then remove it and press it onto the specific component.

Tip 2:

To create a basic Co2 kit, we will need the following components:

– CO2 cylinders

– CO2 reducer, which allows us to regulate the amount of gas supplied from the cylinder

– Dedicated high-pressure PU hose, we recommend a minimum of 2–3 meters (better to take more than less)

– CO2 diffuser is an important component of a CO2 system, as it breaks down gas bubbles directly in the aquarium into much smaller ones, thus eliminating losses associated with the solubility of gas in water.

– CO2 indicator together with the indicator fluid. A must-have when administering CO2. It allows you to determine and continuously monitor the amount of CO2 in water. This allows us to determine whether we are supplying the appropriate amount of CO2 to the aquarium. Thanks to this, we can also avoid the so-called fish suffocation (too much CO2 in the water) or increase the amount of CO2 supplied if there is not enough of it. This is usually indicated by colors: yellow – too much, green – adequate level, blue – too little.

Optionally, we recommend the following for the above set:

– Bubble counter – thanks to this, we can precisely set and determine the amount that is to be released from the cylinder into the aquarium.

– Precision valve – much more accurate than a CO2 regulator, allowing for more precise adjustment of the amount of gas supplied from the cylinder to the aquarium.

All of the components we have listed are available for purchase in our store. If you would like to purchase a ready-made Co2 kit, please refer to our other auctions, where we have also prepared such kits.